The primary purpose of the job is to assist the Workshop Supervisor to carry out various workshop duties in support of drilling operations and to supervise the Technician I field work related to servicing of wellheads, replacing valves, re-orienting x-mass trees and construction of burn lines; and/or assist the team with site preparation activities.Reports to: SENIOR WORKSHOP SUPERVISOR OR DRILLING SUPERINTENDENT - DRILLING & COMPLETIONS.Your TasksSupervise the Technician I field work related to servicing of wellheads and X-mass trees for the wells in the custody of the Drilling Department and ensure that HSE issues are addressed within all relevant activities.Investigate and troubleshoot any integrity problem related to the wellhead and X-mass tree valves or site preparation. Arrange for pressure testing the same in accordance with procedures.Supervise the replacement of valves, re-orientation of the X-mass trees with the assistance of Technician I. Ensure that the well is secure and down hole plugs are installed by the wire line group prior to carrying out the work.Supervise the construction of burn lines that are required for carrying out the “rig-less” operations.Ensure that the loading, offloading, transporting and constructing of the burn line is conducted in a safe manner.Coordinate with and assist the General Foreman for scheduling the work related to the maintenance of automatic hydraulic pumps, pressure testing of wellhead, x-mass tree, cleaning and repairing of 3K and 10Kpsi choke manifold equipment, providing routine maintenance of all equipment and tools such as gauges, air compressors, hydraulic units, etc.Coordinate with the General Foreman for the scheduling of work activities in the workshop and well site, including overseeing the laying of burn lines, maintenance & greasing of wellheads valves during rig and “rig-less” operations while the well is in the custody of the Drilling and Completions Department.Initiate purchase orders and “Material Reservations” for Drilling Workshop requirements using SAP and Materials Call off Orders. Ensure the materials required for drilling operations are in accordance with specified quantities and specifications and are loaded from materials stores in a safe manner. Ensure all documentation is properly made and recorded. Initiate “Contract Work Orders” for fabrications, threading of tubular crossovers, pup joints, etc. including receiving instruction for the work orders from Workshop Supervisor with specification and drawings as necessary. Ensure the necessary approval is obtained and coordinate with the contractor until items are received in the Drilling Workshop.Coordinate with General Foreman to ensure that Technician I are trained for safe handling of equipment, safety practices and procedures related to the workshop and well site works are followed and that pre-job safety meetings are conducted for all critical operations.Coordinate with the General Foreman for maintaining and updating the stock records for a wide variety of drilling tools/equipment in the custody of the workshop i.e. wellheads, tubular, drilling bits, liner hanger, etc.As required, assist with site preparation work, including surveying new locations as per the set criteria, endorsing PTW daily, and following up with site preparation civil work, drilling conductor, and water wells.Your ProfileCompletion of secondary (12 years) education, followed by 2 years training with the ability of reading, writing, and understanding the well sketches and manuals.Good knowledge of both spoken and written English.At least 3 years’ experience of handling tools and equipment related to work.Qatari Driving license.Our OfferSalary:Monthly Rate in QAR Plus AllowanceWork Schedule:8 Hours / 5 DaysDuration:5 years with possible extensionLocation:Qatar#J-18808-Ljbffr